Author: Eustice

Drywall, Home improvement, Plaster, Spackle

Patch Your Drywall to Clean and Protect Your Walls

It’s not a big deal, just unsightly at first. However those small holes and cracks in your drywall can easily become larger when ignored and create more problems. As the mother of 2 grown children there are countless places where posters of the latest pop star or video game were hung, now just an unsightly little hole. Not to mention the time someone accidentally put a slightly larger hole in that wall while playing ball inside, I’m sure nobody knows who. Follow the steps below and fix those bothersome holes and cracks easily and efficiently. You can restore the look of your walls and protect them from further damage.

  1. Use a utility knife or a painter’s 5 in 1 tool to remove any cracked plaster, drywall, or chipped paint. You will want to pull away any loose debris or paper and make sure the surface is smooth.
  2. Use a flexible putty knife to apply spackle and fill in any small holes. Swipe on in smooth, even strokes and remove any excess as soon as possible. Follow manufacturer’s directions to let it dry and then buff with a block of fine  sandpaper.
  3. For slightly larger holes you will repeat the process of cleaning and smoothing the area, then apply self-adhesive, fiberglass mesh tape to cover  the whole following manufacturers directions.
  4. Repeat the process of applying spackle to cover the mesh tape, removing any excess with your spackle tool or putty knife. Allow the spackle to dry overnight and then smooth it over by using a block of fine grain sandpaper. It’s best to lay down a drop cloth first to catch the spackle dust that will fall and you may want to wear a mask so as not to inhale any.
  5. Once the process is complete you may need to add a second coat of spackle to make sure it is a completely smooth surface. Then you are ready to prime and paint.

* Below is a video to follow with all the directions for completing these steps and some additional tips and tricks to protect and preserve your walls.

Things to Avoid and Keep in Mind

  • Holes that are larger than 1 ½ inches or so probably need to be repaired with bridging material and a more complex process.
  • Allowing spackle to dry properly between applications is critical to get proper results. Take the time in the beginning to get a good result in the end.
  • When you are done sanding and smoothing the surface after your final coat of spackle it is helpful to use a slightly damp cloth to make sure all particles of dust are gone before applying any paint. You will get the best look and finish and your paint will adhere properly.
Closets, DIY, Home improvement, Silicone

Fix the Loud Slam on Your Cabinet Door and Find Some Peace and Quiet

If you are like me I sometimes jump at unexpected or loud noises. I am even startled when I know the noise is coming . I’m not super anxious or edgy, though I could cut back on my coffee intake, it’s just a natural human reaction. Loud cabinet doors in my home take me off guard,  it’s disconcerting and annoying as the process is repeated. Fixing the loud whack of cabinet doors can be done with a simple and effective home repair. Follow the below step by step instructions and video link included to take this DIY task in hand and regain a little peace and quiet in your home.

1.      You don’t need any tools or equipment for this project, outside of maybe some rubbing alcohol and a clean rag. You will need to purchase self adhesive silicone bumpers.

2.      Silicone bumpers are available in many home improvement and hardware stores, or online. Make sure you measure your cabinets and count to get the right number and size before you purchase them.

3.      Whatever surface you affix these bumpers to should be thoroughly cleaned prior to putting them on. I recommend using rubbing alcohol and a clean cloth, and letting it dry before trying to affix the bumper. Be sure this will not damage your cabinets before doing so.

4.      Once the surface is prepared, peel the backing off the silicone bumper, put it in place and hold it on the spot you want it to adhere to on the cabinet. Follow manufacturer’s directions to get the best results.

This video is for a particular brand of silicone bumper however there are many available on the market to suit different needs. The steps to follow are the same.

Things to Keep In Mind

·         If you put one of the silicone bumpers on and it does not adhere or comes off quickly then do not try to reaffix it. Once the oils from your hand or anything else have come in contact with the self-adhesive side it will not work properly.

·         Buying a pack of silicone bumpers with plenty in it, or even an extra pack, is the best way to ensure you will have enough. Even if some do not adhere properly the first time, or happen to fall off.

  • This project is not meant to completely remove any sound from closing your cabinet, but to reduce it. In order to completely remove any sound that would require the installation of soft close door hinges or similar items. This is a  more costly and involved home improvement project you may want to look into if you are so inclined.
Energy Efficiency

Install Weather Stripping on Your Windows for Cost and Energy Efficiency

Install Low Cost Efficient Weather Stripping

Install weather stripping on your windows to save money on your heating and cooling bills and reduce energy waste.

Weather stripping on your windows is cost effective, improves the value of your home and is eco friendly. This simple and effective home repair project saves on your utility bills by avoiding unwanted warm air when you are trying  to cool your home during the summer months and unwanted cool air during the winter months. The steps below are for weather stripping a double hung window using v flex weather stripping, the most common type of windows.

** In the directions below and the video  the window sash refers to the frame of each window pane that holds the glass and the jam is a larger window frame around that that the windows sit in.

Use a damp rag to wipe clean the window jam, and any area that you intend to apply the weather stripping to on the inside and outside panes of your window.

Cut the strip to the length that you want, to be precise it is best to use a measuring tape to get the right length. Cut your piece 1inches longer than you will need.

To fully seal the window you need a piece for both sides of the inner and outer sash, the bottom of the inner sash, the top of the outer sash, and the meeting rail where the outer sash meets the inner sash.

Start on one side of your inner sash. Peel away the backing of the strip except for an inch or so at the top, later you will need to push this piece up between the sash and the jam and this makes that easier.

Press the strip in place on the window jam with the v facing inside and fold it over. Tuck the extra tape up between the sash and jam. Repeat this on the other side of the inner sash and close the sash. Peel away that backing that you left and adhere the tail end of the strip on each side.

Install the piece of weather stripping you measured for the bottom of the inner sash and the top of the outer sash in the same manner in step 4.

For the meeting rail lower the outer sash to expose the inside face and install a piece of weather stripping as you did in step four with the v facing down.

Review the steps in this video carefully before you begin your project to help it go smoothly and much more quickly.

Things to Keep In Mind

  • Measuring your windows and how much weather stripping you will need before you begin the project will save considerable time and hassle.
  • Purchase some extra weather stripping in order to avoid running out mid way through or in case there are any parts that you need to redo during the project or later on.